It’s Mini Monday, where I share customizing, scratch building, kit bashing, and miniature painting projects for your roleplaying table. This week I’ll show you how to build a miniature Japanese torii gate for Steampunk Musha, Legend of the Five Rings, or similar East Asian inspired settings.
Here she is, folks. This miniature Japanese torii can easily accommodate most Large sized D&D or Pathfinder figures in the center.

Steampunk Musha – Shangti Factory Hub
This project is the first part of my Steampunk Musha terrain project that will consist of several factory pieces set in the mega city of Shangti. Since it’s steampunk, I figure this set will work well for both my Warhammer 40k games and for fantasy gaming, so this is a “two birds with one stone” type of deal.
The torii gate we’re making today is highly customizable, but is perfect for a Japanese themed game. You could use a similar technique to make gallows or other structures featuring a prominent wooden frame.
Getting Started
You’ll need balsa wood for this, but popsicle sticks will work well too. A sharp hobby knife, wood glue, and sandpaper will do all the heavy lifting, then you can paint and varnish the gate as you see fit when it’s done. I used hardboard for the base.
Prep
Make a paper template for the top piece of the gate (the kasagi and shimaki). Cut 3 of these. Cut 1 long crossbar (nuki), and 6 poles (to make the hashira). We’ll add more bits later, so keep any extra wood aside.
Torii Frame
Place 1 top section on top of 2 pillars. There’s no need to glue it yet, but you can if you like.
Glue the crossbar onto the pillars, with a small space between it and the top piece.
Connecting Things
Score lines on 2 more pillars under the crossbar, like so:
Then cut along the scored lines.
Glue the longer sections of pillar below the crossbar. Glue the short sections of the pillar over the top section. This forms the very center of your Japanese torii gate.
Don’t worry too much if the glue is causing all the pieces to float around. When you’re done you can move everything nicely into place, and sanding will clean it all up when we’re done.
Bulking Up the Top
Score lines to match the location of the pillars onto the second top piece.
Glue the pieces of the second top piece onto the first top piece. In the end, this gives the model more strength and bulk.
Finishing Up your Miniature Japanese Torii
Now glue on the last of the pillars and top piece. If your glue is still wet at this stage you can move things around, then put a heavy book on the gate and let it dry.
Next, add a small down piece between the top and the crossbar. Then cut 2 identical pieces to form the very top section of the tori. These will look like slightly curved french fries.
When it’s dry, use your hobby knife to make everything flush along the edges, then sand the model. An emery board (used for fingernails) works very well for this.

I base coated my model white, then painted the whole thing red. I washed it with a purple wash to pick up the natural wood texture of the balsa wood, and to age the model a bit.
For the base, I used hardwood covered in two grades of sand, the finest for the path. I painted and dry brushed this before adding flock. I varnished everything when I was done, because I like harder wearing gaming pieces.
Pro Tip: Suppliers of Shinto religious goods will often have miniature Japanese torii for sale. Personally, I prefer to make my own.
Till next time, play good games!
Rodney Sloan
Rising Phoenix Games
Check out our store, subscribe to our newsletter for monthly updates, and visit us on our blog, our Facebook page and on Twitter.